How to Fix Cracked Stucco on a House
Cracked Stucco on a House? What Are the Steps to Stucco Repair? Stucco cracks occur due to different causes. Depending on the size and pattern, cracks can be caused by improper application of the metal lathe or poor design. A professional must be contacted for any of these problems. Listed below are some steps to fix cracked stucco. Follow these steps to get your home back to its former glory.
Before beginning the repair process, make sure to determine the exact cause of the crack. If the crack is due to settling, you can choose to do the repairs yourself, or you can call Stucco Repair to do the job. Either way, you must prevent rainwater from penetrating the crack because it can cause a bigger problem. Depending on the type of crack, a professional can perform both DIY and professional stucco repair.
Small cracks in stucco are easy to repair and cost less than $30. If you are handy with tools, you can buy a pre-mixed stucco repair kit for around $15. However, large cracks are best repaired by a professional because it requires a skilled team. Depending on the extent of the damage, you may need to remove loose pieces of stucco before attempting to repair them. In addition, you can also purchase a pre-mixed bucket of stucco for around $15.
If a large crack in stucco is causing problems, you can try filling the crack with paint or acrylic exterior caulk. You can even apply a thin layer of the caulk if you’re not sure which method to choose. After the repairs have been made, you can paint the area to match the rest of the stucco. It will take about an hour to repair one wall. Experienced stucco repair professionals may take less time.
Whether you opt for stucco repair or stucco replacement, the most important thing to do is to understand the difference between the two. Stucco repair is the easier option, and replacement is a more complex and costly task. For the most part, the repair is enough, but if a deeper problem exists, you may need to get rid of it. If you’re unsure, you can ask a professional for help. They will know the difference between the two.
Using the right method for stucco repair will depend on several factors. The size of the crack or hole, your experience, and the warning signs of a larger problem will influence the best method for your needs. Patching products vary in size and purpose, so use the right one for the specific crack or hole. If you’re working with a small crack, you can use a wire brush to add texture to the patch.
Before applying the new coat, you need to carefully spread the patch on the affected area and level it with a leveling trowel. Once the patch is completely dry, you can remove the plastic sheet. Then, apply a second coat of stucco. Apply a 3/8-inch-thick coat of the mixture. Then, use a brick trowel to pack down the patch and smooth it out. This process is repeated for every other side of the damaged area until it’s even.
If you’ve noticed cracks or stains on your stucco, you should seek immediate repair. Despite its durability, it’s vulnerable to damage. Early detection of damage can prevent the need for costly repairs and save you money. Fortunately, there are a number of options for homeowners to repair their stucco. To start, you should check the exterior of your house for signs of water damage. This will give you a clearer picture of what type of repairs need to be made to restore the damaged stucco.
Apply the compound to the damaged area using a rubber float. Apply a layer of compound every quarter-inch until the patch is flush with the surrounding stucco. Rub off excess compound using a sponge to match the surrounding texture. If you’re applying a large patch to a small area, you may need to apply several layers to match the original stucco thickness. Each coat should be about 1/4-inch thick and dry over the next 24 hours.
